Skip to Main Content

UTP Research Articles

UTP research articles published in Q1 and Q2 journal

                         

                  

Journal Articles (2019)

Article 1: A comparative evaluation of an integrated hybrid bioreactor treating industrial wastewater / Ezechi E.H., Kutty S.R.M., Muda K., Yaqub A.
Article 2: A comparative study of approaches towards energy efficiency and renewable energy use at higher education institutions / Leal Filho W., Salvia A.L., Paço A.D., Anholon R., Gonçalves Quelhas O.L., Rampasso I.S., Ng A., Balogun A.-L., Kondev B., Brandli L.L.
Article 3: A method for the empirical formulation of current profile / Kim D.K., Wong E.W.C., Lee E.B., Yu S.Y., Kim Y.T.
Article 4: A parametric study on fatigue of a top-tensioned riser subjected to vortex-induced vibrations / Kim D.K., Wong E.W.C., Lekkala M.K.R.
Article 5: A review of nitrogen removal for urban stormwater runoff in bioretention system / Osman M., Yusof K.W., Takaijudin H., Goh H.W., Malek M.A., Azizan N.A., Ghani A.A., Abdurrasheed A.S.
Article 6: A review of the socio-economic advantages of textile recycling / Leal Filho W., Ellams D., Han S., Tyler D., Boiten V.J., Paco A., Moora H., Balogun A.-L.
Article 7: A review of using natural rubber in the modification of bitumen and asphalt mixtures used for road construction / Al-Sabaeei A., Md. Yussof N.I., Napiah M., Sutanto M.
Article 8: A review on mechanism of rainwater in triggering landslide / Alsubal S., Sapari N.B., Harahap I.S.H., Ali Mohammed Al-Bared M.
Article 9: A Systematic Approach to Embodied Carbon Reduction in Buildings / Moayedi F., Amila Wan Abdullah Zawawi N., Shahir Liew M.
Article 10: Adsorption kinetics of colour removal from palm oil mill effluent using wastewater sludge carbon in column studies / Kutty S.R.M., Almahbashi N.M.Y., Nazrin A.A.M., Malek M.A., Noor A., Baloo L., Ghaleb A.A.S.
Article 11: An experimental investigation on the shear and flexural behavior of steel reinforced HPSCC beams / Nikbakht E., Al-Fakih A., Hui C.C., Jake L.Y., Mahzabin M.S.
Article 12: Application of response surface methodology for the optimization of polycyclic aromatic hydrocarbons degradation from potable water using photo-Fenton oxidation process / Abd Manan T.S.B., Khan T., Sivapalan S., Jusoh H., Sapari N., Sarwono A., Ramli R.M., Harimurti S., Beddu S., Sadon S.N., Kamal N.L.M., Malakahmad A.
Article 13: Assessing the impacts of climate change in cities and their adaptive capacity: Towards transformative approaches to climate change adaptation and poverty reduction in urban areas in a set of developing countries / Filho W.L., Balogun A.-L., Olayide O.E., Azeiteiro U.M., Ayal D.Y., Muñoz P.D.C., Nagy G.J., Bynoe P., Oguge O., Yannick Toamukum N., Saroar M., Li C.

Article 1: Behaviour of kenaf fibre reinforced composite / Mahzabin M.S., Jee Hock L., Siong Kang L., Nikbakht Jarghouyeh E.
Article 2: Behavioural observations of adult-child pairs at a Pelican crossing: A case study in Kuala Lumpur / Termida N.A., Rohani M.M., Daniel B.D., Omar N., Dharmowijoyo D.B.E.
Article 3: Below-Grade Sulfur Storage Pits in Oil Refineries: A Review / Anwar A., Mohammed B.S., Liew M.S., Wahab M.A., Zawawi N.A.W.A.
Article 4: BIM and e-negotiation practices in AEC consulting businesses / Rahmawati Y., Utomo C., Zawawi N.A.W.A.
Article 5: Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology / Achara B.E., Mohammed B.S., Liew M.S.
Article 6: Building life cycle analysis toward low carbon emission and energy efficiency / Moayedi F., Amila Wan Abdullah Zawawi N., Shahir Liew M.

 

Article 1: Challenges facing municipalities to provide wastewater services: A case study of Gaza strip / Tayeh B.A., Alaloul W.S., Alnairab A.F.
Article 2: Challenges facing small-sized construction firms in the gaza strip / Tayeh B.A., Alaloul W.S., Muhaisen W.B.

Article 3: Classification of reinforced concrete single story and double story house using eco-efficiency index approach

/ Hamid M.S.A., Shafiq N., Musir A.A., Rosseli S.R.

Article 1: Dam operation under changing climate: Analysing water availability and hydropower production from murum dam in sarawak / Yusof K.W., Hussain M., Ul Mustafa M.R.
Article 2: Data Preparation for GIS based Land Suitability Modelling: A Stepped Approach / Khahro S.H., Matori A.N., Chandio I.A., Talpur M.A.H.
Article 3: Degradation of imazapic and imazapyr herbicides in the presence of optimized oil palm empty fruit bunch and rice husk biochars in soil / Yavari S., Sapari N.B., Malakahmad A., Yavari S.
Article 4: Design of a pavement using piezoelectric materials [Gestaltung eines Gehweges mittels piezoelektrischer Werkstoffe] / Maghsoudi Nia E., Wan Abdullah Zawawi N.A., Mahinder Singh B.S.
Article 5: Designing a Database Schema for Supporting Visual Management of Variable Parameters in BIM Models / Kuo W.-L., Lee H.-X., Hsieh S.-H.
Article 6: Downtime Cost Analysis of Offloading Operations Considering Vessel Motions and Mooring Responses in Malaysian Waters / Patel M.S., Liew M.S., Mustaffa Z., Al-Yacouby A.M., Abdurrasheed A.S., Whyte A.

 

Article 1: Eco-efficiency index analysis of single story structure of reinforced concrete house using economical and environmental score approach / Hamid M.S.A., Jasni O.O., Shafiq N.
Article 2: Effect of crumb rubber, epolene (EE-2), and date palm ash as modifiers on the performance of binders and mixtures: A sustainable approach / Khan M.I., Sutanto M.H., Sunarjono S., Room S., Yusoff N.I.M.
Article 3: Effect of hydraulic retention time on volatile fatty acid production and organic degradation in anaerobic digestion of palm oil mill effluent / Wong L.P., Isa M.H., Bashir M.J.K., Chin Y.H.
Article 4: Effect of irradiated and non-irradiated waste PET based cementitious grouts on flexural strength of semi-flexible pavement / Khan M.I., Huat H.Y., bin Muhamad Dun M.H., Sutanto M.H., Jarghouyeh E.N., Zoorob S.E.
Article 5: Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM) / Mohammed B.S., Achara B.E., Liew M.S., Alaloul W.S., Khed V.C.
Article 6: Effects of modified metakaolin using nano-silica on the mechanical properties and durability of concrete / Shafiq N., Kumar R., Zahid M., Tufail R.F.
Article 7: Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen / Al-Sabaeei A., Napiah M., Sutanto M., Alaloul W.
Article 8: Effects of water depth, mooring line diameter and hydrodynamic coefficients on the behaviour of deepwater FPSOs / Ahmed Ali M.O., Ja'e I.A., Zhen Hwa M.G.
Article 9: Establishing the Level of BIM implementation - A Case Study in Melaka, Malaysia / Yahya Al-Ashmori Y., Bin Othman I., Bin Mohamad H., Rahmawati Y., Napiah M.
Article 10: Evaluation of the dynamic responses of truss spar platforms for different mooring materials in intact and damaged line conditions / Ahmed M.O., Yenduri A., John K.V.
Article 11: Exploratory factor analysis of skills requirement for PPP contract governance / Umar A.A., Zawawi N.A.W.A., Abdul-Aziz A.-R.

Article 1: Factors affecting defects occurrence in structural design stage of residential buildings in gaza strip / Tayeh B.A., Hamad R.J.A., Alaloul W.S., Almanassra M.
Article 2: Factors influencing customer intention to stay in green hotel in Malaysia / Lim J.M., Al Madhoun W., Yee C.M., Nair G., Siong W.S., Isiyaka H.A.
Article 3: Flood susceptibility mapping using GIS-based analytic network process: A case study of Perlis, Malaysia / Dano U.L., Balogun A.-L., Matori A.-N., Yusouf K., Abubakar I.R., Mohamed M.A.S., Aina Y.A., Pradhan B.
Article 4: Forensic investigation of a slender high-rise structure subject to dynamic wind conditions / Lim E.S., Lee H.E., Liew M.S.

 

Article 1: Geotechnical aspects of tunnel lining with segmental joint parameters to improve soil surface settlement prediction / Jusoh S.N., Yusufiansyah D., Mohamad H., Abdullah R.A., Mohd Yunus N.Z.

Article 1: Hazard risks pertaining to partially submerged non-stationary vehicle on low-lying roadways under subcritical flows / Shah S.M.H., Mustaffa Z., Matínez-Gomariz E., Yusof K.W., Al-Qadami E.H.H.
Article 2: Hybrid liquid biphasic system for cell disruption and simultaneous lipid extraction from microalgae Chlorella sorokiniana CY-1 for biofuel production / Yew G.Y., Chew K.W., Malek M.A., Ho Y.-C., Chen W.-H., Ling T.C., Show P.L.

Article 1: Immobilization of heavy metals for building materials in the construction industry - An overview / Kamal N.L.M., Beddu S., Syamsir A., Mohammad D., Itam Z., Hamid Z.A.A., Manan T.S.A.
Article 2: Incorporation of waste materials in the manufacture of masonry bricks: An update review / Al-Fakih A., Mohammed B.S., Liew M.S., Nikbakht E.
Article 3: Influence of secondary reinforcement on behaviour of corbels with various types of high-performance fiber-reinforced cementitious composites / Zaman A.B.K., Mustaffa Z., Giri L.D.L.A.
Article 4: Inorganic carbon acquisition by gracilaria edulis and its effect on growth / Lavania-Baloo, Azman S., Said M.I.M., Mawi S.
Article 5: Instrumented laterally loaded pile test using distributed fibre optic sensor / Mohamad H., Tee B.P., Chong M.F., Ang K.A., Rashid A.S.A., Abdullah R.A.
Article 6: Investigating the effects of fiber reinforced concrete on the performance of end-zone of pre-stressed beams / Jalal A., Shafiq N., Zahid M.
Article 7: Investigating the impacts of ultra-fine calcium carbonate in high-volume fly ash concrete for structural rehabilitation for sustainable development / Azmee N.M., Shafiq N.

 

Article 1: Kinetics coefficient of palm oil clinker media for an attached growth media in sequencing batch reactor mode / Kuan Y.Z., Kutty S.R.M., Ghaleb A.A.S.     
Article 2: Kinetics of nutrient removal in an integrated suspended growth reactor / Almahbashi N.M.Y., Kutty S.R.M., Chua Y.C., Sholagberu A.T., Ghaleb A.A.S., Aminu N.

Article 1: Landfill leachate treatment through electro-fenton oxidation / Mohajeri S., Hamidi A.A., Isa M.H., Zahed M.A.
Article 2: Land-use assessment and its influence on spatial distribution of rainfall erosivity: Case study of Cameron Highlands Malaysia / Ul Mustafa M.R., Sholagberu A.T., Syazwan M.A., Yusof K.W., Hashim A.M., Abdurrasheed A.S.
Article 3: Levee as a flood mitigation option in Malaysia, its' susceptibility to failure and design approach / Mohd Nordin N.F., Mohamad H.

 

Article 1: Measuring the relationships of road service quality and road traffic accidents / Zahidy A.A., Sutanto M.H., Napiah M., Hamid Z.A.
Article 2: Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator / Mohammed B.S., Haruna S., Wahab M.M.A., Liew M.S., Haruna A.
Article 3: Mechanical behaviour of waste powdered tilesand portland cement treated soft clay / Al-Bared M.A.M., Harahap I.S.H., Marto A., Nezhad Khalil Abad S.V.A., Mustaffa Z., Ali M.O.A.
Article 4: Mobility and health: The interaction of activity-travel patterns, overall well-being, transport-related social exclusion on health parameters / Dharmowijoyo D.B.E., Joewono T.B.
Article 5: Modelling of flow parameters through subsurface drainage modules for application in BIOECODS / Abdurrasheed A.S., Yusof K.W., Hussein Alqadami E.H., Takaijudin H., Ghani A.A., Muhammad M.M., Sholagberu A.T., Zainalfikry M.K., Osman M., Patel M.S.
Article 6: Monitoring subsurface ground movement using fibre optic inclinometer sensor / Ghazali M.F., Mohamad H.
Article 7: Mooring System Optimisation and Effect of Different Line Design Variables on Motions of Truss Spar Platforms in Intact and Damaged Conditions / Montasir O.A., Yenduri A., Kurian V.J.
Article 8: Multivariate analysis of monsoon seasonal variation and prediction of particulate matter episode using regression and hybrid models / Nazif A., Mohammed N.I., Malakahmad A., Abualqumboz M.S.
Article 9: Multivariate logistic regression model for soil erosion susceptibility assessment under static and dynamic causative factors / Sholagberu A.T., Mustafa M.R.U., Yusof K.W., Hashim A.M., Shah M.M., Khan M.W.A., Isa M.H.

Article 1: Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology / Mohammed B.S., Adamu M.
Article 2: Nonlinear System Identification of Structures Subject to Stochastic Loadings / Lim E.S., Liew M.S.
Article 3: Numerical framework to determine instability modes for static vehicles under partial submergence / Shah S.M.H., Mustaffa Z., Yusof K.W.
Article 4: Numerical modelling of flow characteristics over sharp crested triangular hump / Al-Qadami E.H.H., Abdurrasheed A.S., Mustaffa Z., Yusof K.W., Malek M.A., Ghani A.A.

 

Article 1: Operational carbon footprint prediction model for conventional tropical housing: a Malaysian prospective / Gardezi S.S.S., Shafiq N.
Article 2: Optimisation and modelling of Pb(II) and Cu(II) biosorption onto red algae (Gracilaria changii) by using response surface methodology / Isam M., Baloo L., Kutty S.R.M., Yavari S.     
Article 3: Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology / Mohammed B.S., Haruna S., Mubarak bn Abdul Wahab M., Liew M.S.    
Article 4: Optimization of ultrasound irradiation for palm oil mill effluent / Wong L.P., Isa M.H., Bashir M.J.K., Guo X.X.

Article 1: Performance investigation of a solar still having polythene film cover and black painted stainless steel basin integrated with a photovoltaic module–direct current heater / Riahi A., Zakaria N.A., Isa M.H., Wan Yusof K., Mahinder Singh B.S., Mustaffa Z., Takaijudin H.
Article 2: Polymer Nanocomposite-Modified Asphalt: Characterisation and Optimisation Using Response Surface Methodology / Bala N., Kamaruddin I., Napiah M., Sutanto M.H.
Article 3: Prediction of building damage induced by tunnelling through an optimized artificial neural network / Moosazadeh S., Namazi E., Aghababaei H., Marto A., Mohamad H., Hajihassani M.
Article 4: Production of biodiesel from Annona muricata seeds / Wong W.-L., Lim W.-H., Si J., Lam M.-K., Ho Y.-C.
Article 5: Properties of modified high permeable concrete with a crumb rubber / Ng C.Y., Narong A.R., Kamarul Zaman A.B., Mustaffa Z., Mohammed B.S., Ean L.W.

 

Article 1: Quantitative analysis of soil erosion causative factors for susceptibility assessment in a complex watershed / Abdulkadir T.S., Muhammad R.U.M., Wan Yusof K., Ahmad M.H., Aremu S.A., Gohari A., Abdurrasheed A.S.    

Article 1: Reconstruction of residential buildings post-disaster: A comparison of influencing factors / Alaloul W.S., Alfaseeh A.S., Tayeh B.A., Zawawi N.A.W.A., Liew M.S.
Article 2: Red lentil (Lens culinaris) extract as a novel natural coagulant for turbidity reduction: An evaluation, characterization and performance optimization study / Chua S.-C., Malek M.A., Chong F.-K., Sujarwo W., Ho Y.-C.
Article 3: Rehabilitation of corroded circular hollow sectional steel beam by CFRP patch / Setvati M.R., Mustaffa Z.
Article 4: Role of trees in climate change and their authentication through scanning electron microscopy / Arshad S., Ahmad M., Saboor A., Ibrahim F.H., Mustafa M.R.U., Zafar M., Ashfaq S.
Article 5: Rutting and moisture damage evaluation of warm mix asphalt incorporating POFA modified bitumen / Abdulrahman S., Hainin M.R., Satar M.K.I.M., Hassan N.A., Usman A.

Article 1: Safe braking distance at signalized intersection / Ghafar N.H.A., Sutanto M.H., Saeed S.M., Sunarjono S.    
Article 2: Settlement monitoring of liquefied natural gas terminal with persistent scatterer interferometry / Matori A.N., Ab Latip A.S.     
Article 3: Stability of cut slope and degradation of rock slope forming materials – A review / Al-Bared M.A.M., Harahap I.S.H., Marto A., Mustaffa Z., Ali M.O.A., Alsubal S.     
Article 4: Step by step procedures: Degradation of polycyclic aromatic hydrocarbons in potable water using photo-Fenton oxidation process / Abd Manan T.S.B., Beddu S., Khan T., Wan Mohtar W.H.M., Sarwono A., Jusoh H., Mohd Kamal N.L., Sivapalan S., Ghanim A.A.J.    
Article 5: Storage stability and morphology of latex modified bitumen / Usman A., Izzaty N., Ibrahim R., Sutanto M.H., Sunarjono S.
Article 6: Strength behavior of concrete by partial replacement of fine aggregate with ceramic powder / Ahmad S., Anwar A., Mohammed B.S., Wahab M.B.A., Ahmad S.A.
Article 7: Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC / Mohammed B.S., Aswin M., Liew M.S., Zawawi N.A.W.A.
Article 8: Sustainable assessment of academic buildings at Universiti Teknologi Petronas campus / Al Madhoun W.A., Firdaus A.A., Isiyaka H.A.
Article 9: Sustainable materials selection based on flood damage assessment for a building using LCA and LCC / Balasbaneh A.T., Bin Marsono A.K., Gohari A.
Article 10: Sustainable practices barriers towards green projects in Malaysia / Klufallah M., Ibrahim I.S., Moayedi F.

Article 1: Tender pricing of infrastructure projects: Affecting factors / Tayeh B.A., Alaloul W.S., Al-Ghazalli N.K.
Article 2: The effect of stone column geometry on soft soil bearing capacity / Hamzh A., Mohamad H., Bin Yusof M.F.
Article 3: The Total Quality Management (TQM) journey of Malaysian building contractors / Othman I., Norfarahhanim Mohd Ghani S., Woon Choon S.
Article 4: Thermal properties of cool asphalt concrete containing phase change material / Mizwar I.K., Napiah M., Sutanto M.H.    
Article 5: Transformation of biomass waste into sustainable organic fertilizers / Chew K.W., Chia S.R., Yen H.-W., Nomanbhay S., Ho Y.-C., Show P.L.

Article 1: Ultimate bending capacity of aged fixed platform by considering the effect of marine fouling / Mohd M.H., Zalaya M.A., Latheef M., Choi H.S., Rahman M.A.A., Kim D.K.    
Article 2: Ultimate strength prediction of T-bar stiffened panel under longitudinal compression by data processing: A refined empirical formulation / Kim D.K., Lim H.L., Yu S.Y.    
Article 3: Undrained shear strength and microstructural characterization of treated soft soil with recycled materials / Al-Bared M.A.M., Harahap I.S.H., Marto A., Abad S.V.A.N.K., Ali M.O.A.

 

 

     

Article 1: Yield efficiency evaluation of double slope solar stills connected with external spiral copper for potable water production / Al-Qadami E.H.H., Ahsan A., Abdurrasheed A.S., Mustaffa Z., Yusof K.W., Takaijudin H., Malek M.A.

 

Journal Articles (2020)

This is the compilation of UTP Research Articles available in Information Resource Centre, Universiti Teknologi PETRONAS. Visit our library website to read, download and more information.

 Article 1: Downtime cost analysis of offloading operations under irregular waves in Malaysian waters / Patel, M.S., Liew, M.S., Mustaffa, Z., Abdurasheed, A.S., Whyte, A.
Article 2: Effects of sand/fly ash and the water/solid ratio on the mechanical properties of engineered geopolymer composite and mix design optimization / Zahid, M., Shafiq, N.
Article 3: Establishing the correlations for eco-efficiency index of various types of structural concrete used in the Malaysian housing using response surface method / Hamid, M.S.A., Shafiq, N., Kiwan, O.
Article 4: Facies control on selective dolomitization and its impact on reservoir heterogeneities in the Samana Suk Formation (middle Jurassic), Southern Hazara Basin (NW Himalaya, Pakistan): an outcrop analogue / Shah, M.M., Rahim, H.U., Hassan, A., Mustafa, M.R., Ahmad, I.
Article 5: Flexural behavior of double-skin steel tube beams filled with fiber-reinforced cementitious composite and strengthened with CFRP sheets / Al-Nini, A., Nikbakht, E., Syamsir, A., Shafiq, N., Mohammed, B.S., Al-Fakih, A., Al-Nini, W., Amran, Y.H.M.

 

For more articles, click here

Journal Articles (2021)

Article 1: A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysia / Umar U.A., Shafiq N., Ahmad F.A.
Article 2: A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysia / Umar, U.A., Shafiq, N., Ahmad, F.A.
Article 3:A circular economy framework based on organic wastes upcycling for biodiesel production from hermetia illucens / Leong S.Y., Kutty S.R.M., Bashir M.J.K., Li Q.
Article 4: A novel test device for the direct measurement of tensile strength of rock using ring shape sample / Aliha M.R.M., Ebneabbasi P., Karimi H.R., Nikbakht E.
Article 5: A review of safety guidelines for vehicles in floodwaters / Shah S.M.H., Mustaffa Z., Martínez-Gomariz E., Yusof K.W., Al-Qadami E.H.H.
Article 6: A study of the impact of plunging waves on the inverted L-shaped breakwater structure based on SPH method / Ma Z., Yang Y., Zhai G., Bao J., Teh H.-M.
Article 7: A study of the wave impact loads on a fixed column-slab combined structure with a GPU-accelerated SPH method / Zhai G., Bao J., Ma Z., Yang Y., Teh H.M.

Article 1: Barriers of occupational safety implementation in infrastructure projects: Gaza strip case / Abu Aisheh Y.I., Tayeh B.A., Alaloul W.S., Jouda A.F.
Article 2: Barriers of value management implementation for building projects in Egyptian construction industry / Othman, I., Kineber, A.F., Oke, A.E., Zayed, T., Buniya, M.K.
Article 3: Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber / Solikin, M., Falah, M.F., Sunarjono, S., Hidayati, N., Trinugroho, S., Sutanto, M.H., Asnan, M.N.
Article 4: Briquetting of Dry Sugarcane Leaves by Using Press Mud, Cow Dung, and Buffalo Dung as Binders / Patil, R.A., Deshannavar, U.B., Ramasamy, M., Emani, S., Issakhov, A., Khalilpoor, N.
Article 5: Burst capacity and development of interaction rules for pipelines considering radial interacting corrosion defects / Idris N.N., Mustaffa Z., Ben Seghier M.E.A., Trung N.-T.

 

Article 1: CFD investigation into seakeeping performance of a training ship / Fitriadhy A., Dewa S., Mansor N.A., Adam N.A., Ng C.Y., Kang H.S.
Article 2: Choice modelling of a car traveler towards park-and-ride services in putrajaya to create green development / Memon, I.A., Sahito, N., Kalwar, S., Hwang, J., Napiah, M., Zaly Shah, M.
Article 3: Criterion of vehicle instability in floodwaters: past, present and future / Shah S.M.H., Mustaffa Z., Martinez-Gomariz E., Kim D.K., Yusof K.W.

Article 1: Degradation of Cd, Cu, Fe, Mn, Pb and Zn by Moringa-oleifera, zeolite, ferric-chloride, chitosan and alum in an industrial effluent / Jagaba A.H., Kutty S.R.M., Hayder G., Baloo L., Ghaleb A.A.S., Lawal I.M., Abubakar S., Al-dhawi B.N.S., Almahbashi N.M.Y., Umaru I.
Article 2: Demystifying uncertainty in PM10 susceptibility mapping using variable drop-off in extreme-gradient boosting (XGB) and random forest (RF) algorithms / AlThuwaynee O.F., Kim S.-W., Najemaden M.A., Aydda A., Balogun A.-L., Fayyadh M.M., Park H.-J.   
Article 3: Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology / Khan M.I., Sutanto M.H., Napiah M.B., Khan K., Rafiq W.
Article 4: Development of the skew boundary condition for soil-structure interaction in three-dimensional finite element analysis / Phuor, T., Harahap, I.S.H., Ng, C.Y., Al-Bared, M.A.M. 
Article 5: Diagenetic Modifications and Reservoir Heterogeneity Associated with Magmatic Intrusions in the Devonian Khyber Limestone, Peshawar Basin, NW Pakistan / Shah, M.M., Afridi, S., Khan, E.U., Rahim, H.U., Mustafa, M.R.
Article 6: Digital technologies in the architecture, engineering and construction (Aec) industry—a bibliometric—qualitative literature review of research activities / Manzoor, B., Othman, I., Pomares, J.C.
Article 7: Directional spreading resolution from point measurements for mixed seas and sea states with frequency dependent spreading / Latheef, M., Kim, D.K.
Article 8: Dynamic Analysis of Semi-submersible Under the Postulated Failure of Restraining System with Buoy / Chandrasekaran S., Uddin S.A., Wahab M.

 

Article 1: Effect of roof tile colour on heat conduction transfer, roof-top surface temperature and cooling load in modern residential buildings under the tropical climate of Malaysia / Farhan, S.A., Ismail, F.I., Kiwan, O., Shafiq, N., Zain-Ahmed, A., Husna, N., Hamid, A.I.A.
Article 2: Effects of petroleum sludge ash in fly ash-based geopolymer mortar / Usman Kankia M., Baloo L., Mohammed B.S., Hassan S.B., Haruna S., Danlami N., Affiana Ishak E., Nurliyana Samahani W.
Article 3: Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil / Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L., Manan, T.S.B.A., Chelliapan, S., Sidik, A.B.C.
 Article 4: Enhancing the microstructure and sustainability of ultra-high-performance concrete using ultrafine calcium carbonate and high-volume fly ash under different curing regimes / Azmee N., Abbas Y.M., Shafiq N., Fares G., Osman M., Iqbal Khan M.
Article 5: Evaluating the critical safety factors causing accidents in high-rise building projects / Manzoor, B., Othman, I., Manzoor, M.
Article 6: Evaluation of the accuracy of soft computing learning algorithms in performance prediction of tidal turbine / Band, S.S., Taherei Ghazvinei, P., bin Wan Yusof, K., Hossein Ahmadi, M., Nabipour, N., Chau, K.-W.
Article 7: Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt / Al-Sabaeei, A.M., Napiah, M.B., Sutanto, M.H., Alaloul, W.S., Yusoff, N.I.M., Khairuddin, F.H., Memon, A.M.
Article 8: Experimental program on the burst capacity of reinforced thermoplastic pipe (RTP) under impact of quasi-static lateral load / Bakar, M.A.A., Mustaffa, Z., Idris, N.N., Ben Seghier, M.E.A.

Article 1: FROUDE NUMBER VARIANCE WITH RESPECT TO THE HYDRODYNAMIC RESPONSE OF A NON-STATIC VEHICLE ON A LOW-LYING FLOODED ROADWAY / Shah S.M.H., Mustaffa Z., Khahro S.H., Yusof K.W., Al-Qadami E.H.H., Ghani A.A., Teo F.Y.

 

 

   

Article 1: Identification of time-varying linear and nonlinear impulse response functions using parametric Volterra model from model test data with application to a moored floating structure / Yazid E., Ng C.Y.
Article 2: Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology / Usman A., Sutanto M.H., Napiah M., Zoorob S.E., Abdulrahman S., Saeed S.M.

 

     

 

 

Article 1: Malaysian regulators' ranking of PPP contract governance skills / Umar, A.A., Zawawi, N.A.W.A., Abdul-Aziz, A.-R.
Article 2: Mechanical and post-cracking characteristics of fiber reinforced concrete containing copper-coated steel and PVA fibers in 100% cement and fly ash concrete / Jalal A., Hakim L., Shafiq N.
Article 3: Mechanical properties of silica fume modified high-volume fly ash rubberized self-compacting concrete / Alaloul, W.S., Musarat, M.A., Haruna, S., Law, K., Tayeh, B.A., Rafiq, W., Ayub, S.
Article 4: Mode choice modeling to shift car travelers towards park and ride service in the city centre of karachi / Memon, I.A., Kalwar, S., Sahito, N., Talpur, M.A.H., Chandio, I.A., Napiah, M., Tayyeb, H.
Article 5: Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology / Rafiq, W., Napiah, M., Habib, N.Z., Sutanto, M.H., Alaloul, W.S., Khan, M.I., Musarat, M.A., Memon, A.M.
Article 6: Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen / Yaro, N.S.A., Napiah, M.B., Sutanto, M.H., Usman, A., Saeed, S.M.
Article 7: Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM) / Abdulkadir I., Mohammed B.S., Liew M.S., Wahab M.M.A.

Article 1: Nano-porous silica-aerogel-incorporated composite materials for thermal-energy-efficient pitched roof in the tropical region / Ismail, F.I., Farhan, S.A., Shafiq, N., Husna, N., Sharif, M.T., Affan, S.U., Veerasenan, A.K.

 

Article 1: On rubberized engineered cementitious composites (R-ECC): A review of the constituent material / Al-Fakih A., Mohammed B.S., Liew M.S.
Article 2: Optimization of culture conditions for gamma-aminobutyric acid production by newly identified Pediococcus pentosaceus MN12 isolated from ‘mam nem’, a fermented fish sauce / Thuy D.T.B., Nguyen A., Khoo K.S., Chew K.W., Cnockaert M., Vandamme P., Ho Y.-C., Huy N.D., Cocoletzi H.H., Show P.L.   
Article 3: Optimization of Preparation Conditions of Sewage sludge based Activated Carbon / Almahbashi, N.M.Y., Kutty, S.R.M., Ayoub, M., Noor, A., Salihi, I.U., Al-Nini, A., Jagaba, A.H., Aldhawi, B.N.S., Ghaleb, A.A.S.
Article 4: Optimization of rubber seed oil content as bio-oil rejuvenator and total water content for cold recycled asphalt mixtures using response surface methodology / Saeed, S.M., Sutanto, M.H., Napiah, M., Usman, A., Batari, A., Aman, M.Y., Aliyu Yaro, N.S.

Article 1: Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt / Al-Sabaeei, A.M., Napiah, M., Sutanto, M., Alaloul, W., Md Yusoff, N.I., Imran Khan, M., Modibbo Saeed, S.
Article 2: Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge / Memon, A.M., Sutanto, M.H., Napiah, M., Yusoff, N.I.M., Memon, R.A., Al-Sabaeei, A.M., Ali, M.
Article 3: Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives — A State of the Art Literature Review / Ahmad, A., Sutanto, M.H., Al-Bared, M.A.M., Harahap, I.S.H., Abad, S.V.A.N.K., Khan, M.A.
Article 4: Predictive modeling approach for surface water quality: Development and comparison of machine learning models / Izhar Shah, M., Alaloul, W.S., Alqahtani, A., Aldrees, A., Ali Musarat, M., Javed, M.F.
Article 5: Properties of rubberized engineered cementitious composites containing nano-silica / Loganathan, R., Mohammed, B.S.

 

    

Article 1: Recent advancement of sustainable and renewable energy in osmotic power generation / Yew G.-Y., Liew Z.-S., Lai S.-O., Chew T.-L., Teh H.-M., Shafiai S.H., Lam M.-K., Lim J.-W., Show P.-L., Ho Y.-C.
Article 2: Reducing the waiting-on-cement time of geopolymer well cement using calcium chloride (CaCl2) as the accelerator: Analysis of the compressive strength and acoustic impedance for well logging / Zulkarnain, N.N., Farhan, S.A., Sazali, Y.A., Shafiq, N., Abd Rahman, S.H., Abd Hamid, A.I., Habarudin, M.F.
Article 3: Reliability assessment of the vertical well system subjected to erosion and tubing failure / Mustaffa Z., Halim A.H.A., Kim D.K., van Gelder P.H.A.J.M.
Article 4: Rock stiffness measurements fibre Bragg grating sensor (FBGs) and the effect of cyanoacrylate and epoxy resin as adhesive materials / Isah, B.W., Mohamad, H., Ahmad, N.R.

Article 1: Safety program elements in the construction industry: The case of Iraq / Buniya, M.K., Othman, I., Durdyev, S., Sunindijo, R.Y., Ismail, S., Kineber, A.F.
Article 2: Simulation and optimisation of integrated anaerobic-aerobic bioreactor (IAAB) for the treatment of palm oil mill effluent / Chong, J.W.R., Chan, Y.J., Chong, S., Ho, Y.C., Mohamad, M., Tan, W.N., Cheng, C.K., Lim, J.W.
Article 3: Soil erosion susceptibility mapping using a GIS-based multi-criteria decision approach: Case of district Chitral, Pakistan / Aslam, B., Maqsoom, A., Salah Alaloul, W., Ali Musarat, M., Jabbar, T., Zafar, A.    
Article 4: Spatial identification and temporal prediction of air pollution sources using conditional bivariate probability function and time series signature / Althuwaynee, O.F., Pokharel, B., Aydda, A., Balogun, A.-L., Kim, S.-W., Park, H.-J.
Article 5: Strategies for adopting building information modeling (Bim) in sustainable building projects—A case of Malaysia / Manzoor, B., Othman, I., Gardezi, S.S.S., Harirchian, E.  
Article 6: Strength enhancement of concrete using incinerated agricultural waste as supplementary cement materials / Manan, T.S.B.A., Kamal, N.L.M., Beddu, S., Khan, T., Mohamad, D., Syamsir, A., Itam, Z., Jusoh, H., Basri, N.A.N., Mohtar, W.H.M.W., Isa, M.H., Shafiq, N., Ahmad, A., Rasdi, N.W.
Article 7: Structural behaviour of novel composite beams consisting of geopolymer concrete and high-performance concrete / Nikbakht E., Wong Weng Lok J., Teo W.    
Article 8: Sugarcane bagasse as a co-substrate with oil-refinery biological sludge for biogas production using batch mesophilic anaerobic co-digestion technology: Effect of carbon/nitrogen ratio / Ghaleb A.A.S., Kutty S.R.M., Salih G.H.A., Jagaba A.H., Noor A., Kumar V., Almahbashi N.M.Y., Saeed A.A.H., Saleh Al-dhawi B.N.
Article 9: Surface-mounted bare and packaged fiber bragg grating sensors for measuring rock strain in uniaxial testing / Isah, B.W., Mohamad, H. 

Article 1: The effect of inflation rate on CO2 emission: A framework for malaysian construction industry / Musarat M.A., Alaloul W.S., Liew M.S., Maqsoom A., Qureshi A.H.
Article 2: The fate of imazapyr herbicide in the soil amended with carbon sorbents / Yavari, S., Kamyab, H., Asadpour, R., Yavari, S., Sapari, N.B., Baloo, L., Manan, T.S.B.A., Ashokkumar, V., Chelliapan, S.
Article 3: Thickness optimization of thin-film tandem organic solar cell / Bangash, K.A., Kazmi, S.A.A., Farooq, W., Ayub, S., Musarat, M.A., Alaloul, W.S., Javed, M.F., Mosavi, A.

Article 1: Utilization of crumb rubber and high-volume fly ash in concrete for environmental sustainability: Rsm-based modeling and optimization / Murali, M., Mohammed, B.S., Abdulkadir, I., Liew, M.S., Alaloul, W.S.   
Article 2: Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review / Yaro, N.S.A., Napiah, M., Sutanto, M.H., Hainin, M.R., Usman, A., Rafindadi, A.D., Abdulrahman, S., Saeed, S.M.

Article 1: Value-based decision to redevelop transportation facilities: A case study of an abandoned airport / Xian, B.W.X., Rahmawati, Y., Al-Aidrous, A.-H.M.H., Utomo, C., Wan Abdullah Zawawi, N.A., Raflis

Article 1: Watertight integrity of underwater robotic vehicles by self-healing mechanism / Ma, G., Kamaruddin, M.H., Kang, H.-S., Goh, P.-S., Kim, M.-H., Lee, K.-Q., Ng, C.-Y.

     

 

Journal Articles (2022)

Article 1: A Comparative Study of Probabilistic and Deterministic Methods for the Direct and Indirect Costs in Life-Cycle Cost Analysis for Airport Pavements / Babashamsi, P., Khahro, S.H., Omar, H.A., Rosyidi, S.A.P., Al-Sabaeei, A.M., Milad, A., Bilema, M., Sutanto, M.H., Yusoff, N.I.M.
Article 2: A study of nanoparticle shape in water/alumina/boehmite nanofluid flow in the thermal management of a lithium-ion battery under the presence of phase-change materials / Jiang, Y., Wang, X., Mahmoud, M.Z., Elkotb, M.A., Baloo, L., Li, Z., Heidarshenas, B.
Article 3: A study of the impact of plunging waves on the inverted L-shaped breakwater structure based on SPH method / Ma, Z., Yang, Y., Zhai, G., Bao, J., Teh, H.-M.
Article 4: A study of the wave impact loads on a fixed column-slab combined structure with a GPU-accelerated SPH method / Zhai, G., Bao, J., Ma, Z., Yang, Y., Teh, H.M.
Article 5: Adsorption of chromium, copper, lead and mercury ions from aqueous solution using bio and nano adsorbents: A review of recent trends in the application of AC, BC, nZVI and Mxene / Khurshid, H., Mustafa, M.R.U., Isa, M.H.
Article 6: AL-ACHIEVING SUSTAINABLE WASTE MANAGEMENT AT CONSTRUCTION SITES VIA LIFE-CYCLE OF ENVIRONMENTAL IMPACT ASSESSMENT / Mohammed, M., Shafiq, N., Abdallah, N.A.W., Ayoub, M., Haruna, A., Ibrahim, M.B.
Article 7: Analysis of the causes and preventive measures of fatal fall-related accidents in the construction industry / Rafindadi, A.D., Napiah, M., Othman, I., Mikić, M., Haruna, A., Alarifi, H., Al-Ashmori, Y.Y.
Article 8: Application in the optimization of Pb(II) adsorption by chitosan from produced water by using response surface methodology / Gul Zaman, H., Baloo, L., Pendyala, R.
Article 9: Assessment of imidacloprid removal from agricultural runoff by the bioretention treatment train system / Ahmad Zubairi, N.A., Takaijudin, H., Ab Ghani, A., Goh, H.W., Day, W.A.
Article 10: Assessment of Land Use Land Cover Changes and Future Predictions Using CA-ANN Simulation for Selangor, Malaysia / Baig, M.F., Mustafa, M.R.U., Baig, I., Takaijudin, H.B., Zeshan, M.T.   
Article 11: Assessment of metal leaching from rediset-polymer modified asphalt binder on groundwater and soil contamination / Rahmad, S., Khahro, S.H., Rosyidi, S.A.P., Widyatmoko, I., Memon, N.A., Al-Sabaeei, A.M., Milad, A., Sutanto, M.H., Yusoff, N.I.M. 
Article 12: Auto Modelling for Machine Learning: A Comparison Implementation between Rapid Miner and Python / Baharun, N., Razi, N.F.M., Masrom, S., Yusri, N.A.M., Rahman, A.S.A.

Article 1: Bearing Capacity Factors for Rough Conical Footing by Viscoplasticity Finite-Element Analysis / Phuor, T., Harahap, I.S.H., Ng, C.-Y.
Article 2: Behavior of steel clamp confined brick aggregate concrete circular columns subjected to axial compression / Rodsin, K., Joyklad, P., Hussain, Q., Mohamad, H., Buatik, A., Zhou, M., Chaiyasarn, K., Nawaz, A., Mehmood, T., ELNEMR, A.
Article 3: Bending characteristics of Prestressed High Strength Concrete (PHC) spun pile measured using distributed optical fibre strain sensor / Mohamad, H., Tee, B.P., Chong, M.F., Lee, S.C., Chaiyasarn, K.
Article 4: Beneficial Effects of 3D BIM for Pre-Empting Waste during the Planning and Design Stage of Building and Waste Reduction Strategies / Mohammed, M., Shafiq, N., Al-Mekhlafi, A.-B.A., Al-Fakih, A., Zawawi, N.A., Mohamed, A.M., Khallaf, R., Abualrejal, H.M., Shehu, A.A., Al-Nini, A.
Article 5: Bio-efficacy of imidazolinones in weed control in a tropical paddy soil amended with optimized agrowaste-derived biochars / Yavari, S., Kamyab, H., Binti Abd Manan, T.S., Chelliapan, S., Asadpour, R., Yavari, S., Sapari, N.B., Baloo, L., Sidik, A.B.C., Kirpichnikova, I.

 

Article 1: Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement for fine aggregate in engineered cementitious composite (ECC) / Alaloul, W.S., Musarat, M.A., Haruna, S., Tayeh, B.A., Norizan, M.N.B.
Article 2: COD adsorption and optimization from produced water using chitosan–ZnO nanocomposite / Zaman, H.G., Baloo, L., Aziz, F., Kutty, S.R., Ashraf, A.
Article 3: Column Study for Adsorption of Copper and Cadmium Using Activated Carbon Derived from Sewage Sludge / Al-Mahbashi, N., Kutty, S.R.M., Jagaba, A.H., Al-Nini, A., Ali, M., Saeed, A.A.H., Ghaleb, A.A.S., Rathnayake, U.
Article 4: Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures / Yaro, N.S.A., Sutanto, M.H., Habib, N.Z., Napiah, M., Usman, A., Muhammad, A.
Article 5: Comprehensive passive-mode performance analysis on a new multiple-mode solar still for sustainable clean water processing / Abimbola, T.O., Takaijudin, H., Mahinder Singh, B.S., Yusof, K.W., Abdurrasheed, A.S., Al-Qadami, E.H.H., Isah, A.S., Wong, K.X., Ahmad Nadzri, N.F., Ishola, S.A., Owoseni, T.A., Akilu, S.         
Article 6: Contributions of safety critical success factors and safety program elements to overall project success / Buniya, M.K., Othman, I., Sunindijo, R.Y., Karakhan, A.A., Kineber, A.F., Durdyev, S.

     
     

 

Article 1: Effect of Crumb Rubber, Fly Ash, and Nanosilica on the Properties of Self-Compacting Concrete Using Response Surface Methodology / Rahim, N.I., Mohammed, B.S., Abdulkadir, I., Dahim, M.  
Article 2: Effect of directional spreading angles on the wave hydrodynamic coefficients for vertical cylinder / Ng, C.Y., Tuhaijan, S.N.A., Kurian, V.J., Mustaffa, Z., Yazid, E., Kang, H.S.
Article 3: Effect of Elastomeric Expandable Additive on Compressive Strength and Linear Expansion of Fly-Ash-Based Strength-Enhanced Geopolymer Cement for Shrinkage-Resistant Oil-Well Cementing / Rahman, S.H.A., Farhan, S.A., Sazali, Y.A., Shafiee, L.H., Husna, N., Hamid, A.I.A., Shafiq, N., Zulkarnain, N.N., Habarudin, M.F.
 Article 4: Effect of Hollow Body Material on Mechanical Properties of Bubble Concrete / Yan, X., Chen, P.-S., Liu, B., Mohammed, B.S., Jin, J.
Article 5: Effect of Various Mooring Materials on Hydrodynamic Responses of Turret-Moored FPSO with Emphasis on Intact and Damaged Conditions / Ja’e, I.A., Ali, M.O.A., Yenduri, A., Nizamani, Z., Nakayama, A. 
Article 6: Effective use of recycled waste PET in cementitious grouts for developing sustainable semi-flexible pavement surfacing using artificial neural network (ANN) / Khan, M.I., Sutanto, M.H., Khan, K., Iqbal, M., Napiah, M.B., Zoorob, S.E., Klemeš, J.J., Bokhari, A., Rafiq, W.
Article 7: Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology / Abdulkadir, I., Mohammed, B.S., Ali, M.O.A., Liew, M.S.
Article 8: Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil / Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L., Manan, T.S.B.A., Chelliapan, S., Sidik, A.B.C.
Article 9: Engineering Properties of Palm Oil Clinker Fine-Modified Asphaltic Concrete Mixtures / Yaro, N.S.A., Napiah, M., Sutanto, M.H., Usman, A., Mizwar, I.K., Umar, A.M.
Article 10: Enhancing Students’ Competency and Learning Experience in Structural Engineering through Collaborative Building Design Practices / Rahmawati, Y., Pradipto, E., Mustaffa, Z., Saputra, A., Mohammed, B.S., Utomo, C.
Article 11: Evaluating the awareness and implementation level of LCCA in the construction industry of Malaysia / Altaf, M., Alalaoul, W.S., Musarat, M.A., Hussain, A., Saad, S., Rabbani, M.B.A., Ammad, S.
Article 12: Evaluation of Biases in Construction Project Dispute Resolution: Case Study / Tayeh, B.A., Alaloul, W.S., Alkurdi, M.H., Abu Aisheh, Y.I., Musarat, M.A.
Article 13: Evaluation of Contemporary Computational Techniques to Optimize Adsorption Process for Simultaneous Removal of COD and TOC in Wastewater / Alhothali, A., Khurshid, H., Mustafa, M.R.U., Moria, K.M., Rashid, U., Bamasag, O.O.
Article 14: Evaluation of Long‐Term Trends of Rainfall in Perak, Malaysia / Hanif, M.F., Mustafa, M.R.U., Liaqat, M.U., Hashim, A.M., Yusof, K.W.
Article 15: Experimental Investigation on Ambient-Cured One-Part Alkali-Activated Binders Using Combined High-Calcium Fly Ash (HCFA) and Ground Granulated Blast Furnace Slag (GGBS) / Teo, W., Shirai, K., Lim, J.H., Jack, L.B., Nikbakht, E.

Article 1: Factors impacting the implementation process of automated construction progress monitoring / Hannan Qureshi, A., Alaloul, W.S., Wing, W.K., Saad, S., Ammad, S., Musarat, M.A.
Article 2: Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties / Abd Razak, S.N., Shafiq, N., Guillaumat, L., Farhan, S.A., Lohana, V.K.
Article 3: Full-scale experimental investigations on the response of a flooded passenger vehicle under subcritical conditions / Al-Qadami, E.H.H., Mustaffa, Z., Shah, S.M.H., Matínez-Gomariz, E., Yusof, K.W.

 

Article 1: Green's function and finite element formulations for the dynamics of pipeline conveying fluid / Soon, F.K., Hoon, T.P., Latheef, M., Yassin, A.Y.M.

   

Article 1: Identification of critical success factors for the adoption of Industrialized Building System (IBS) in Malaysian construction industry / Saad, S., Alaloul, W.S., Ammad, S., Altaf, M., Qureshi, A.H.
Article 2: Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen / Al-Sabaeei, A.M., Napiah, M.B., Sutanto, M.H., Alaloul, W.S., Zoorob, S.E., Usman, A.
Article 3: Intrinsic workforce diversity and construction worker productivity in Pakistan: Impact of employee age and industry experience / Maqsoom, A., Mubbasit, H., Alqurashi, M., Shaheen, I., Alaloul, W.S., Musarat, M.A., Salman, A., Aslam, B., Zerouali, B., Hussein, E.E.

 

     

Article 1:Lateral Infiltration Capacity of Pervious Concrete and Its Performance as Pavement Curb / Kamarul Zaman, A.B., Mustaffa, Z., Mohammed, B.S., Ng, C.Y.

 

Article 1:Marble Dust Effect on the Air Quality: An Environmental Assessment Approach / Iqbal, Q., Musarat, M.A., Ullah, N., Alaloul, W.S., Rabbani, M.B.A., Madhoun, W.A., Iqbal, S.
Article 2:Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization / Appana, P.M., Mohammed, B.S., Abdulkadir, I., Ali, M.O.A., Liew, M.S.
Article 3:Modeling the Impact of Massive Open Online Courses (MOOC) Implementation Factors on Continuance Intention of Students: PLS-SEM Approach / Al-Mekhlafi, A.-B.A., Othman, I., Kineber, A.F., Mousa, A.A., Zamil, A.M.A.
Article 4:Modelling the relationship between value management’s activities and critical success factors for sustainable buildings / Farouk Kineber, A., Othman, I.B., Oke, A.E., Chileshe, N.
Article 5:Modified Activated Carbon Synthesized from Oil Palm Leaves Waste as a Novel Green Adsorbent for Chemical Oxygen Demand in Produced Water / Khurshid, H., Mustafa, M.R.U., Isa, M.H. 

 

Article 1:Optimisation of heating uniformity for milk pasteurisation using microwave coaxial slot applicator system / Abdullah, S.N., You, K.Y., Chong, C.Y., El-Enshasy, H.A., Mohamed Ali, M.S., Zainol, N.A., Ismael, A.H., Khe, C.S.
     

Article 1:Parametric optimization and kinetic modelling for organic matter removal from agro-waste derived paper packaging biorefinery wastewater / Jagaba, A.H., Kutty, S.R.M., Noor, A., Affam, A.C., Ghfar, A.A., Usman, A.K., Lawal, I.M., Birniwa, A.H., Kankia, M.U., Afolabi, H.K., Soja, U.B.   
Article 2:Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance / Babashamsi, P., Khahro, S.H., Omar, H.A., Al-Sabaeei, A.M., Memon, A.M., Milad, A., Khan, M.I., Sutanto, M.H., Yusoff, N.I.M.
Article 3:Pollen morphology of selected melliferous plants and its taxonomic implications using microscopy / Attique, R., Zafar, M., Ahmad, M., Zafar, S., Ghufran, M.A., Mustafa, M.R.U., Yaseen, G., Ahmad, L., Sultana, S., Nabila, Zafar, A., Majeed, S.

 

    

Article 1:Relational pre-impact assessment of conventional housing features and carbon footprint for achieving sustainable built environment / Gardezi, S.S.S., Shafiq, N., Khan, M.W.A.  
Article 2:Reliability assessment of subsea pipelines under the effect of spanning load and corrosion degradation / Ben Seghier, M.E.A., Mustaffa, Z., Zayed, T.
Article 3:Road Accident Data Collection Systems in Developing and Developed Countries: A Review / Rabbani, M.B.A., Musarat, M.A., Alaloul, W.S., Ayub, S., Bukhari, H., Altaf, M.

Article 1: Significant factors that influence the use and non-use of personal protective equipment (PPE) on construction sites—Supervisors' perspective / Darda'u Rafindadi, A., Napiah, M., Othman, I., Alarifi, H., Musa, U., Muhammad, M.    
     

Article 1: Treatment of synthetic wastewater by using submerged attached growth media in continuous activated sludge reactor system / Al-Dhawi, B.N.S., Kutty, S.R.M., Baloo, L., Almahbashi, N.M.Y., Ghaleb, A.A.S., Jagaba, A.H., Kumar, V., Saeed, A.A.H.
Article 2: Thermal-Energy Performance of Bulk Insulation Coupled with High-Albedo Roof Tiles in Urban Pitched Residential Roof Assemblies in the Hot, Humid Climate/ Dahim, M., Farhan, S.A., Shafiq, N., Al-Mattarneh, H., Ismail, R.
Article 3: The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement / Abdullah, M.J., Beddu, S., Manan, T.S.B.A., Syamsir, A., Naganathan, S., Mohd Kamal, N.L., Mohamad, D., Itam, Z., Yee+, H.M., Mohd Yapandi, M.F.K., Mohamed Nazri, F., Shafiq, N., Isa, M.H., Ahmad, A., Wan Rasdi, N.  
Article 4: The Performance of Treatment Train System Incorporated with Nature-Based Materials in Capturing Nutrient for Stormwater Runoff / Ali, W., Takaijudin, H., Kutty, S.R.M., Massoudieh, A.    
Article 5: The Mediating Role of Policy-Related Factors in the Relationship between Practice of Waste Generation and Sustainable Construction Waste Minimisation: PLS-SEM( / Mohammed, M., Shafiq, N., Al-Mekhlafi, A.-B.A., Rashed, E.F., Khalil, M.H., Zawawi, N.A., Muhammad, A., Sadis, A.M. 
Article 6: The effect of stone column geometry on soft soil bearing capacity / Hamzh, A., Mohamad, H., Bin Yusof, M.F.   

     

Article 1: Values, Challenges, and Critical Success Factors of Building Information Modelling (BIM) in Malaysia: Experts Perspective / Al-Ashmori, Y.Y., Othman, I., Al-Aidrous, A.-H.M.H.

 

     

Article 1: Zero‐Energy Buildings and Energy Efficiency towards Sustainability: A Bibliometric Review and a Case Study / Manzoor, B., Othman, I., Sadowska, B., Sarosiek, W.